Trailed Ridger
- Regular price Price ex VAT: £135.00
- Regular price Price inc VAT: £135.00
Rotavate and ridge in one pass with the trailed ridger attached to the BCS rotavator.
It slots into the back of the BCS rotavator attachment on the two wheel tractor, allowing it to be used at the same time as the rotavator. This means that the rotavator helps to propel the machine and the ridger through the earth so reducing the drag created by the ridger.
The working width of the trailed ridger is easily adjusted by placing a locking pin into a hole which will with push the wings out, or bring them in, depending on whether you are widening or narrowing the width. The width can be adjusted from 10cm (4”) to 30cm (12”).

Trailed Ridger | |
Working Width | 10cm (3") to 30cm (12") |
Working Depth | Up to 23cm (9”) |
Dimensions (L W H) | 52 x 59 x 20cm* |
Weight | 8kg |
*with wings at maximum width
Which power units will the trailed ridger fit to?
BCS 710 | ✔ |
BCS 728 | ✔ |
BCS 738 | ✔ |
BCS 740 | ✔ |
BCS 750 | ✔ |
BCS 770HY | ✔ |
BCS 614 | |
BCS 615 | |
BCS 618 | |
BCS 630 | |
BCS 630WS | |
BCS 660HY |
What are the minimum power unit requirements?
4.8hp petrol engine.
One working speed.
4.00 x 8 agricultural wheels.
Are any couplers or toolbars needed?
The trailed ridger fits into the back of the rotavator, so there are no couplers or toolbars required.
Parts Diagrams
![]() |
BCS Trailed Ridger Diagram |
Operating Manuals
![]() |
Operating BCS Trailed Ridger |
![]() |
Original BCS Ploughs and Ridgers Owner's Manual |
- Features
-
The trailed ridger is ideal for “earthing up” and for creating ridges and furrows from 10cm (4”) to 23cm (9”) deep.
It slots into the back of the BCS rotavator attachment on the two wheel tractor, allowing it to be used at the same time as the rotavator. This means that the rotavator helps to propel the machine and the ridger through the earth so reducing the drag created by the ridger.
The working width of the trailed ridger is easily adjusted by placing a locking pin into a hole which will with push the wings out, or bring them in, depending on whether you are widening or narrowing the width. The width can be adjusted from 10cm (4”) to 30cm (12”).
- SPECIFICATION
-
Trailed Ridger Working Width 10cm (3") to 30cm (12") Working Depth Up to 23cm (9”) Dimensions (L W H) 52 x 59 x 20cm* Weight 8kg *with wings at maximum width
- COMPATIBILITY
-
Which power units will the trailed ridger fit to?
BCS 710 ✔ BCS 728 ✔ BCS 738 ✔ BCS 740 ✔ BCS 750 ✔ BCS 770HY ✔ BCS 614 BCS 615 BCS 618 BCS 630 BCS 630WS BCS 660HY What are the minimum power unit requirements?
4.8hp petrol engine.
One working speed.
4.00 x 8 agricultural wheels.
Are any couplers or toolbars needed?
The trailed ridger fits into the back of the rotavator, so there are no couplers or toolbars required.
- VIDEOS
-
- DOWNLOADS
-
Parts Diagrams
BCS Trailed Ridger Diagram Operating Manuals
Operating BCS Trailed Ridger Original BCS Ploughs and Ridgers Owner's Manual