Pneumatic Wheels

4.00 x 8 • 4.00 x 10 • 5.00 x 10 • 6.50 x 12

All BCS power units are fitted with these pneumatic wheels. These are available in a range of sizes to fit different power units.

Lug Wheels

8.00 x 10

A wider profile and deeper tread than the standard pneumatic wheels offer additional traction and stability.

Turf Wheels

8.00 x 10

A wider, low compaction profile featuring a turf saver tread ideal for use on lawns and turfed areas.

Flotation Wheels

11.00 x 8

A widened profile distributes the load and traction on a much wider contact surface ideal for water-logged or boggy ground.

Twin Wheel Kit

4.00 x 10 • 5.00 x 10 • 6.50 x 12

An additional set of tyres and all the fixings to enable single wheels to be doubled-up. Ideal on slopes where extra stability is required.

Steel Bank Wheels

5.00 x 10

When combined with pneumatic wheels, these wide metal cage  wheels provide extra traction on sloping banks.

Spade Lug Wheels

43cm • 49cm • 58cm

The metal crosspieces on the spade lug wheels help provide additional traction, particularly when ploughing or ridging.

Twinning Rings

49cm

Double the width of the 49cm (19") spade lug wheels to further improve traction in extreme conditions.

Wheel Spacers

6cm

Extend the wheel width by 6cm each side when additional stability is required. These can be doubled-up to add up to 12cm each side.

Adjustable Wheel Spacers

2½cm-15cm • 2½cm-25cm

Where additional stability is required these can be added to the wheels and adjusted as required. They offer more width than the fixed spacers.

Wheel Weights

11kg • 15kg • 34kg

Where extra traction is required these can be bolted to the wheel hubs to increase the tractor weight.